PYNEFLOOR™ GREEN TONGUE®

BENEFITS AND ADVANTAGES
• Lowest installed cost
• No nogs required
• Can be laid in all weathers
• Less nailing
• Optimum sizes
• Can be walked on immediately
• Fast continuous installation

DESCRIPTION
Pynefloor Green Tongue® produced by The Laminex Group is a 20mm nominal thick, high density tongued and grooved, particleboard, flooring material.

Pynefloor Green Tongue is identical to standard Pynefloor Straight Edge, in its manufacture but has the enhancement of a polypropylene tongue that give the required sheer strength and eliminates the need for solid timber nogs to the long edge.

USES
Pynefloor Green Tongue is suitable for use in residential and commercial buildings, as a sheet flooring material in light timber framed construction of non-specific design (as described in NZ 3604). Any other uses may require specific design. The Laminex Group are happy to advise.  Pynefloor Green Tongue must not be used in clear finishing applications.

Pynefloor Green Tongue can be used for all those applications listed in the Pynefloor brochure:

• As a pre- or post-laid flooring over timber and steel joist supports in single or double layer applications. Not to be exposed to weathering for more than 8 weeks
• As an overlay on concrete floor slabs or wooden floors
• As floor diaphragms for the transfer of wind and earthquake loads

DURABILITY
When stored, handled, installed and maintained in accordance with full FWP Technical information, Pynefloor panels will meet:
The durability performance requirements of NZBC B2.3.1(a) for 50 years.

Pynefloor has a BRANZ Appraisal and a B.I.A. Accreditation for use under NZBC B2.3(a) for 50 year durability.

PANEL SIZES (mm)
• 3600 x 900
• 3600 x 1200
• 3600 x 1800
• 2400 x 1200

(Important notes:
1. Pynefloor and Pynefloor Green Tongue CAN be used in conjunction with floor heating systems, provided Pynefloor is not exposed to temperatures greater than 35°C.
2. Also refer to our news section for further comments, T&G particleboard flooring panels, 25/1/2002 Installation of tongued and grooved particleboard flooring panels).

3. For information on Pynefloor in wet areas, see file attached called "Pynefloor Technical Bulletin".

For further information click on the links below. To view PDF files, you will need Adobe's Acrobat Reader. You can download the Reader install file by clicking on the Acrobat Reader link:

Get Acrobat Reader




 Pynefloor Brochure (231 KB)

 Material Safety Data Sheet for Pynefloor (180 KB)

 Pynefloor Technical Manual (1078 KB)

 Nail & Adhesive Requirements (0 KB)

 Plan_A_Floor_Information (0 KB)

 Pynefloor Technical Bulletin (143 KB)